The Tube Deburrer TD-120 is a tube deburring machine. This machine cleans and removes swarf, burrs, and similar sharp edges from profiles which are caused by sawing.
With the ability to deburr material from 10mm (0.4″) to 120mm (4.7″), there is a lot of potential for this machine to be used in many ways. However, one of the most useful applications for this machine is the deburring of complex or detailed extrusions. For example, folded or extruded rail where deburring by hand would be almost impossible.
The machine utilises a double rotation brush. Three steel brushes rotate individually, and also as a group to provide brushing to the surface of the material from every angle. Because of this, most deburring operations are complete in less than a few seconds.
To operate the machine safely, simply adjust the material opening to the correct size, and lock with the handle. Once this has been done, slowly advance the material until contact is being made with the brushes. As a result, the rotating brushes will quickly deburr the material. The process will treat all edges of the material uniformly. The TD-120 also enables simultaneous outside and inside deburring.
As always, operator safety is of utmost concern in fabricating. Because of this, the machine has CE compliant emergency stops to make operator safety of utmost importance. Additionally, the machine covers of the Tube Deburrer TD-120 are fitted with sensors that only allow operation when all panels are shut.
The TD-120 tube deburrer will leave the ends of all cut material burr free, and safe to handle in only a few seconds.
For additional convenience, a waste disposal and dust collection bin are installed inside the machine in a lockable compartment.
For more information, call (+44) 02476 210 123 today!
Tube Deburrer TD-120 Features:
- 10mm – 120mm Ø capacity
- Suitable for all types of tube, pipe, box, and custom profile
- Three steel brushes
- CE compliant emergency stops
- Adjustable and locking material opening
- Box section adapter
- Two speeds
- Automatic shut off sensors
- Inbuilt waste collection/dust extraction bucket
- Self stabilising feet
- OPTIONAL: Automatic feeder
As well as tube deburring machines, DIMAKIN sell tube polishing machines to complement your workshop. Additionally, for a higher-polish finish than belt sanded, you can also find mirror polishing machines here!